Manufacturer: Lenze
Part No: 8200
Web Price:
£458.21 + VAT
New from Manufacturer with Warranty
Delivery normally 2 weeks
Description:
Lenze Drives 8200 AC Inverter for 2.2kW (3HP) 230V or 1.1kW (1.5HP) 110V 3 Ph motor in VxF or Flux Vector control to 9.5A. Simple to set-up and converts single phase 110V or 230V input to three phase 110v or 230V (same Voltage input and output) for a standard AC Induction motor.
Size (240mm Height x 140mm Length x 60mm Width) in IP20 Case.
EMC Filters built-in for Environment 2 (Industrial) to 25m motor cable length for compliance. Use an external footprint filter (not included) for cable runs from 25m to 50m. Use a sine filter for cable runs over 50m to prevent drive trips.
Overload - 180% for 3 seconds or 150% x 60seconds.
Speed Control Range - 0/650Hz.
Braking - to external braking resistor (not included).
Features - 1 x Analogue Input, 5 Digital Inputs (one is Inhibit), 1 x Analogue Output, 1 x Digital Outputs and one relay contact set.
Programmable via keypad or software from a pc (GDC).
Input Current - 18A with via input choke.
Input Voltage - 110V to 240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 3mm.
Heat Loss at max output - 130W.
Price includes a keypad and an input choke at about 100mm cube.
Full part number is - E8200-022-K-2-C200-3x-3x
View alternatives - search for 2.2kW.
Download the Lenze 8200 Manual and Getting Started Guide from the link below:-