ABB Drives ACS 150 AC Frequency Inverter for 1.1kW (1.5HP) 230V 3 Ph motor in VxF control to 6.7A. Converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V output to control the speed of a standard AC Induction motor.
Dimensions: Size R1, 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 40 Ohm Minimum, 130 Ohm Maximum external resistor (not supplied). See the Resistors linked below, or use the 'Brake Resistor Calculator' on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial). See linked products below for external 1st Environment (Domestic) EMC Filter.
Can be used with supplies protected by RCD Type A.
Input Current: 16.1A, or 11A when supplied via 1.2mH choke.
Input Voltage: 200V/240V single phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail, or use the screw fixings for side or rear mounting. Wall mount in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 87W at maximum output.
Part Number: ACS150-01E-06A7-2 (68581974).
Replaces the ACS100 that is no longer manufactured. ACS101-2K1-1.
Application Note: Use this with a 2.2kW x 400V Motor. Setting its 'Base Frequency' to 29Hz, means it will provide full torque output up to the 29Hz speed of the 400V motor.
Download the ABB ACS150 Installation Guide and Manual from the links below:-