Part No: SKA1200075
No Longer Available from us - see alternatives below
Description:
Control Techniques Drives - Commander SK, AC Inverter for a 0.75kW (1.0HP) 230V 3 Ph motor in Sensorless Flux Vector control to 4A. Converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Simple set-up from 'Quick-Start' menu for control up to twice the motors nominal speed.
Size 'A' - 75mm Wide x 145mm Deep x 154mm High - IP20 case.
Overload - 150% x 30seconds.
Speed Control Range - 0/1500Hz.
Braking - 100% duty into minimum 68 Ohm external resistor.
EMC Filters built-in to BSEN61800-3 to the 2nd Environment (Industrial) and removable via pull tab.
2 x Analogue Inputs, 4/5 Digital Inputs (1 x Analogue/Digital), 1 Analogue output, 2 Digital outputs (one relay).
Input Current: - 10.5A via 16A fuse.
Input Voltage - 200V to 240V Single +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Heat Loss is 48W at 3kHz switching frequency (default).
Ventilation space above and below - 100mm.
Ventilation space at sides - 10mm.
Mounting onto symetrical DIN rail or with screw fixing (4 x M4).
Full part number is - SKA1200075.
View alternatives - search for 0.75kW.
Replaces Commander SE