Order Code: 19540
Product Brand: ABB
Part No: ACS355-03E-04A1-4 (3AUA0000058186)
£255.00 + VAT
List Price: £300.00
1 in Stock - order by 3pm for next working day delivery*
New from Manufacturer with Warranty
ABB ACS355 AC Frequency Inverter for 1.5kW (2HP) 400V 3 Phase motor in VxF or Sensorless Vector control to 4.1A. Simple to set-up with 400V three phase input for a standard AC Induction motor or permanent magnet synchronous motor.
No Keypad included.
Size R1 - 70mm Wide x 161mm Deep x 169mm high (239mm high including fastenings and clamp plate). IP20.
Overload - 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range - 0-600Hz.
Braking at full load for 27 seconds every 120 seconds to 130 Ohm minimum, 300 Ohm Maximum external resistor (not supplied) - 200 Ohm resistor is linked below or use the 'Which Resistor' button on this page.
Features - 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
'Safe Stop' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current - 6.9A.
Input Voltage - 380-480V Three Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 68.7W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 50mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is - ACS355-03E-04A1-4 (3AUA0000058186) and is a direct replacement for the equivalent ACS350.
The ACS355 has much the same functions as the ACS550. Use this drive to replace the ACS550-01-04A1-4
Download the ABB ACS355 Manual from the link below:-