ABB Drives ACS350 IP66 Sensorless Flux Vector AC Frequency Inverter for 7.5kW (10HP) 400V 3 Ph motor in VxF or Vector control to 15.6A. Simple to set-up for a standard AC Induction motor.
IP66 / UL Type 4X protection for the harshest and most demanding of conditions. See linked products below for compatible options and standard (IP20) equivalent.
R3 Size - 246mm Wide x 277mm Deep x 436mm high. IP66 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/500Hz.
Braking - To 50 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Features - Assistant Operator Panel (Advanced Keypad), 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current - 22.1A.
Input Voltage - 380-480V three phase at 48-63Hz.
Rated at 40C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - Ensure that there is enough free space around the drive to clean it.
Heat Loss at max output - 204.2W.
Wall Mounting using 4 x screw fixings at rear. Use spacers and fastening lugs to provide clearance for cleaning.
Full part number is - ACS350-03E-15A6-4+B063
Download the ABB ACS350 Manual, Installation Guide and IP66 Supplement from the links below:-