TEC IE3 315kW Cast Iron 4 Pole AC Motor 355 B3 Insulated Bearing NDE

315.043TECCB3-IE3-INSBEARING

Order Code: 36660
Photo of TEC IE3 315kW Cast Iron 4 Pole AC Motor 355 B3 Insulated Bearing NDE
Available to Order
Delivery normally 11 weeks
£15,967.00
(excl. VAT)
£19,160.40
(inc. VAT )
Price break
per unit
1+
£15,967.00
10+
£14,529.97

Condition: New with Warranty
Brand: TEC Electric Motors, Range: TECC IE3 Cast Iron

TEC 315kW 3ph 4 Pole IE3 Premium Efficiency 355L frame, Cast Iron AC Motor for 3 phase supply. Use with a suitable soft starter or a fixed mains supply at 50/60Hz. 

Insulated bearing fitted NDE

Fixed Main Supply Output: 315kW (420HP) x 1480RPM at 400V/690V x 50Hz 3ph. 
Rated Current: 532.14A at 400V, 307.22A at 690V.
Rated Torque: 2032.6Nm
Duty Rating: S1.
Efficiency is 96% at full load.
Power Factor is 0.89 at 100% load.

Dimensions: 1556mm long (including shaft) x 726mm wide x 1010mm high.
Foot mount on 28mm holes at 610mm wide x 630mm centres 254mm back from shaft shoulder.
Weight: 1700kg nett

Ambient temperature: -20°C to 40°C. Altitude: 1000m.

IP55. B3 Mounting. Cooling: IC411.
PT100 150°C thermistors are included for over-temperature protection.

Part number is: 315.043TECCB3-IE3-INSBEARING

Download the full Technical Catalogue from the link below.

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.