Marelli 100 Frame - 1.5kW 3ph 6 Pole AC Motor for 230V and 400V 3 phase supply. Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Can be used over a 20:1 Speed Control range from 100RPM to 2000RPM, with suitable de-rating at the lower speeds.
Fixed mains supply output is 1.5kW (2HP) x 940RPM at 230V or 400V x 50Hz 3ph.
Full Load Current - 6.6A at 230V, or 3.8A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.75 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
194mm Wide x 400mm Long x 259mm high overall in its IP55 enclosure.
Foot mount on 11mm holes at 160mm wide x 140mm centres 63mm back from shaft shoulder.
Shaft is 28mm dia x 60mm with 8mm wide key.
Shaft side load is 135kg for 20,000hrs life (6206-2Z bearing)
Weight is 21.2kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - MAA100LA6 (MAA 100 LA6)
This is around £100 lower than a single phase motor, making a big contribution to the inverter cost.
For Variable Speed use…
Part Time Output when Inverter powered is...
7.1Nm - 1.5kW (2HP) x 2000RPM at 106Hz
20Nm - 2kW (3HP) x 940RPM at 50Hz
20Nm - 1kW (1.3HP) x 470RPM at 25Hz
20Nm - 0.2kW (0.28HP) x 100RPM at 5Hz
Continuous Output when Inverter powered is...
7.1Nm - 1.5kW (2HP) x 2000RPM at 106Hz
15.2Nm - 1.5kW (2HP) x 940RPM at 50Hz
13Nm - 0.62kW (0.84HP) x 470RPM at 25Hz
7.6Nm - 0.08kW (0.1HP) x 100RPM at 5Hz