Marelli - 230V Single Phase Motor 0.75kW (1HP) Cap Run 4P 80F Flange

MYA80MB4 B5

Order Code: 21117
Photo of Marelli - 230V Single Phase Motor 0.75kW (1HP) Cap Run 4P 80F Flange
No Longer Available
This item is no longer available from us. Alternatives may be available - see linked products below.

Brand: Marelli, Range: MYA Single Phase Cap Run

Marelli MYA Series 80 Frame 0.75kW (1HP) Single Phase Capacitor Run (Permanent Capacitor) 4 Pole AC Motor for use at fixed Speed.

Use with a fixed frequency 1ph input at 230V x 50Hz for 0.75kW (1HP) x 1400RPM.

Low starting torque at 70%.
Full Load Current - Not specified.
Starting Current - Not specified.

B5 Flange mounting:-
200mm Wide x 290mm Long x 243mm high overall in its IP55 enclosure.
Flange mount (B5) on 12mm holes at 165mm pcd with 130mm dia spigot in the 200mm diameter flange.
Shaft is 19mm dia x 40mm with 6mm wide key.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - MYA80MB4 B5 (MYA 80 MB4 B5)

You may also be interested in...

Photo of WEG DLWM DOL Starter with Overload for 230V Single Phase Motor 0.55kW to 0.75kW, IP65

WEG DLWM DOL Starter with Overload for 230V Single Phase Motor 0.55kW to 0.75kW, IP65

DLWM-7D24P65-R08

(11624214)

Order code: 22622

2 in stock

3+ normally 5 weeks

£34.19
1+