Schneider Altivar 71 (ATV71) Series AC Inverter for 0.75kW (1HP) 230V 3 Ph motor in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when the optional Encoder Feedback card is fitted) to 4.8A. Converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V, for a standard AC Induction motor.
Dimensions: Size 1 - 130mm Wide x 175mm Deep x 230mm High (depth including its keypad and excluding any option cards).
Enclosure: IP20
Weight: 3kg.
Overload: 150% x 60 seconds, 165% x 2 seconds.
Speed Control Range: 0.1-599Hz
Braking: to 60 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
3 Analogue Inputs, 1 Analogue Output, 1 Analogue/Digital Output, 6 Digital Inputs, 2 Relay Contact sets, RJ45 port for Modbus or CANopen communications. DC Bus terminals for DC supply or common bus energy saving applications.
Input Current: 12A at 200V or 9.9A at 240V.
Input Voltage: 200-240V Three Phase -15% +10% at 50-60Hz ±5%
EMC Filters: EN 55011 class A group 1, IEC/EN 61800-3 category C2 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: 10mm.
Ventilation space above and below: 100mm.
Ventilation space at sides: 50mm (0mm with top vent cover removed).
Heat Loss at max output: 101W.
Mounting via 4 x 5mm diameter holes at rear on 113.5mm x 220mm centres.
Manufacturers part number is ATV71HU15M3. Previously sold under the Telemecanique brand.
Download the Schneider Electric Altivar ATV 71 Manual and Quick Start Guide from the links below:-