WEG CFW-10 IP20 2.2kW 230V 1ph to 3ph AC Inverter Drive, DBr, C3 EMC

WEG Automation CFW-10 AC Frequency Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF control to 10A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.

Size 3 - 115mm Wide x 122mm Deep x 191mm high. IP20.

Overload - 150% x 60 seconds.
Speed Control Range - 0-300Hz.
Braking - To 39 Ohm minimum external resistor (not supplied) Terminal covers must be carefully cut out to reveal the screw terminals BR and + UD - see the resistor Options linked below or use the 'Which Resistor' button on this page.

Features - 1 x Analogue Input, 4 Digital Inputs, 1 x Relay Contact set.
EMC Filters to BSEN61800-3 Class A2 (Industrial).

Input Current - 22A.
Input Voltage - 200-240V Single Phase +10%, -15% at 50/60Hz ±2Hz.

Cubicle mount.
Rated at 40C Ambient.
Ventilation space above - 30mm
Ventilation space below - 50mm.
Ventilation space in front - 50mm.
Heat Loss at max output - 100W.
4 x Mountings for M4 bolts at rear.

Full part number is - CFW10 0100 S 2024 EOFAZ

Download the WEG CFW-10 Manual from the link below:-