ABB ACS350 AC Frequency Inverter for 7.5kW (10HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 15.6A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
No Keypad included - see linked products below for ACS 350 equivalent with Keypad.
R3 Size - 169mm Wide x 169mm Deep x 202mm high (plus cable clamp plate at 34mm) IP20 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/500Hz.
Braking - To 50 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Features - 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via 'Flashdrop'.
Input Current - 22.1A.
Input Voltage - 380 to 480V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm (drives can be mounted side by side).
Heat Loss at max output - 31.2W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is - ACS350-03E-15A6-4
Download the ABB ACS350 Manual and Installation Guide from the links below:-