ABB ACS355 AC Frequency Inverter in IP66 Form for 2.2kW (0.75HP) 400V 3 Phase motor in VxF or Sensorless Vector control to 7.3A. Simple to set-up with 400V three phase input for a standard AC Induction motor or permanent magnet synchronous motor.
Drive includes N827 Option Solar Pump Software
No Keypad included.
Dimensions: Size R1 195mm Wide x 281mm Deep x 305mm high.
Enclosre Rating: IP66.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start.
Speed Control Range: 0-600Hz.
Braking at full load for 90 seconds every 120 seconds to 175 Ohm minimum, 800 Ohm Maximum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply, or common bus energy saving applications.
'Safe Torque Off' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current: **A.
Input Voltage: 250V to 800V DC or 3-phase AC supply at 380V to 480V.
MPPT(maximum Power Pont Tracking), Voltage range 460V to 800V.
DC Voltage Range Min(**) 250Vdc to Max(***) 840Vdc
**) Operation is started with minimum voltage, but 100% AC current cannot be acheived before voltage is equal or higher than minimum MPPT voltage.
***) Panel open circuit voltage should be dimensioned so that it will never in any conditions exceed this level.
Idc Max -6.8A
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Mounting: Wall Mount via 4 x screw fixings at rear. Use spacers and fastening lugs to provide clearance for cleaning.
Ambient Temperature: Rated at 40°C.
Ventilation space above and below: 75mm.
Ventilation space at sides: Ensure that there is enough free space around the drive to clean it.
Heat Loss at max output: 75W.
Part Number: ACS355-03E-7A3-4+B063+N827 (3AUA0000157192+N827+B063).
Download the ABB ACS355 Manuals from the links below:-