Invertek Optidrive P2 IP55 Series AC Inverter for 45kW (60HP) 400V 3 Ph motor to 90A. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when the optional Encoder Feedback card is fitted). Converts fixed frequency three phase 400V input to variable frequency 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
Dimensions: Size 6: 330mm Wide x 330mm Deep x 865mm High. IP55.
Weight: 50kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-500Hz.
Braking: To 6 Ohm minimum external resistor (not supplied), See the Resistor options linked below or use the 'Which Resistor' button on this page.
TFT Display (High Definition LCD Display).
Features: 2 Analogue Inputs, 3 Digital Inputs, 2 Analogue/Digital Outputs, 2 Relay Contact Sets. Additional I/O expansion options are available, see linked products below.
DC Bus terminals are available for DC supply or common bus energy saving applications.
Terminals for Safe Torque Off (EN62061 SIL Level 2), RJ45 RS-485/Modbus RTU/CANopen communications socket.
Input Current: 92.2A.
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%.
EMC Filters: IEC EN61800-3:2004 Category C3 (Industrial).
Mounting: Wall mount or Cubicle mount via 4 x slotted holes at rear for M10 screws on 200mm x 840mm centres.
Ambient: Rated 40°C.
Ventilation space in front: [Not Specified].
Ventilation space above and below: 200mm.
Ventilation space at sides: 10mm.
Manufacturers Part Number: ODP-2-64045-3KF4N-MN (replaces ODP-2-64045-3KF4N-TN).
Made in the UK.
Download the Invertek Optidrive P2 Manual and Advanced User Guide from the links below:-