TEC IE2 22kW Cast Iron Three Phase Motor 400V 6 Pole 200L Frame B3 with Options

22.063TECCB3-IE2-IP66-ACH

Order Code: 29137
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECC IE2 Three Phase Cast Iron

TEC Electric - 22kW 3ph 6 Pole High Efficiency Foot Mounting (B3) Cast Iron 200L Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive, or a fixed frequency mains supply at 50Hz.

Options include:  Anti-Condensation Heater and IP66 Upgrade.

Fixed mains supply output: 22kW (30HP) x 965RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 96.5RPM to 1350RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current:  40.62A at 400V.
Power Factor:  0.86 when mains connected at 50Hz.
Efficiency:  90.9%

Dimensions:  390mm Wide x 745mm Long x 460mm high overall in its IP55 enclosure.
Mounting:  Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder.
Shaft:  55mm dia x 110mm with 16mm wide key.
Drive End Bearing:  Ball Bearing for a direct connected load.
Weight:  238kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistors included for over-temperature protection.
Part number:  22.063TECCB3-IE2-IP66-ACH

For Variable Speed use:-
Part Time Output when Inverter powered is...
109Nm - 22kW ( 29.49HP) x 1930 RPM at 100 Hz
217Nm -22kW ( 30HP) x 965 RPM at 50 Hz
217Nm -11kW ( 14.75HP) x 483 RPM at 25 Hz
217Nm - 2.2kW (2.95HP) x 97 RPM at 5 Hz
Continuous Output when Inverter powered is...
155Nm - 22kW ( 29.49HP) x 1350 RPM at 70 Hz
217Nm -22kW ( 30HP) x 975 RPM at 50 Hz
185Nm - 9.35kW ( 12.53HP) x 483 RPM at 25 Hz
109Nm - 1.1kW (1.47HP) x 97 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.

You may also be interested in...

Photo of TEC TECDrive IP20 22kW 400V 3ph AC Inverter Drive, DBr, C2 EMC

TEC TECDrive IP20 22kW 400V 3ph AC Inverter Drive, DBr, C2 EMC

TEC-3-440460-3F42

Order code: 32351

1 in stock

2+ normally 20 weeks

£1,145.00
1+
Photo of TEC Force Ventilation Fan for 200 Frame Motor, 230V/400V 3ph

TEC Force Ventilation Fan for 200 Frame Motor, 230V/400V 3ph

200-FORCEVENT-400V

Order code: 33066

Delivery 3-5 days

£430.00
£408.50
£387.00
1+
5+
10+