TEC 450kW 3ph 2 Pole IE3 Premium Efficiency 355 frame, Cast Iron AC Motor for 3 phase supply. Use with a suitable soft starter or a fixed mains supply at 50/60Hz.
Fixed Main Supply Output: 450kW (600HP) x 2978RPM at 400V/690V x 50Hz 3ph.
Rated Current: 763A at 400V, 442A at 690V.
Rated Torque: 1443.1Nm
Duty Rating: S1.
Efficiency is 95.7% at full load.
Power Factor is 0.890 at 100% load.
Dimensions: 1780mm long (including shaft) x 760mm wide x 1045mm high.
Foot mount on 35mm holes at 630mm wide x 630mm centres 254mm back from shaft shoulder.
Weight: 2470kg
Ambient temperature: -20°C to 40°C. Altitude: 1000m.
IP55. B3 Mounting. Cooling: IC411.
Fitted with 230V single phase force vent fan. Ventilation space required at rear cooling air intake.
PT100 150°C thermistors are included for over-temperature protection.
Part number is: 450.023TECCB3-IE3.
Download the full Technical Catalogue from the link below.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.