Marelli High Efficiency 200 Frame - 22kW 3ph 6 Pole AC Motor for 400V or 660V 3 phase supply in B3 Foot mounting form. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Fixed mains supply output is 22kW (30HP) x 970RPM at 400V x 50Hz 3ph.
Full Load Current - 41A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.86 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 400V 'Delta' connection.
Set terminal box links 'two at one side' for 660V 'Star' connection.
360mm Wide x 723mm Long x 478mm high overall in its IP55 enclosure.
Foot mount on 18.5mm holes at 318mm wide x 305mm centres 133mm back from shaft shoulder.
Shaft is 48mm diameter x 55mm long
Weight is 145kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - BAQ200LB6 B3
For Variable Speed use:
Part Time Output when Inverter powered is...
108Nm - 22kW (30HP) x 1940RPM at 100Hz
216Nm - 22kW (30HP) x 970RPM at 50Hz
216Nm - 11kW (15HP) x 485RPM at 25Hz
216Nm - 2.2kW (3HP) x 97RPM at 5Hz
Continuous Output when Inverter powered is...
108Nm - 22kW (30HP) x 1940RPM at 100Hz
216Nm - 22kW (30HP) x 970RPM at 50Hz
184Nm - 9.4kW (12.5HP) x 485RPM at 25Hz
108Nm - 1.1kW (1.5HP) x 97RPM at 5Hz
Download the full Manual and dimensioned drawing from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.