TEC Electric - 7.5kW 3ph 4 Pole High Efficiency Foot Mounting (B3) 132M Frame Force Cooled AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive.
Fixed mains supply output: 7.5kW (10HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 140:1 Speed Control range from 15RPM to 2030RPM for 0.5Hz to 70Hz control with suitable sensorless vactor Inverter Drive.
Full Load Current - 14.5A at 400V.
Power Factor is 0.84 at 50Hz.
252mm Wide x 585mm Long x 318mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 178mm centres 89mm back from the shaft shoulder.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 57.6kg.
Rated at 40C Ambient.
Force Cooling fan fitted for 3ph x 400V supply at 0.21A flc.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 7.543TECAB3-IE2-Fc. Previous Part Number was - TECA2-132M1-4-B3-Fc
For Variable Speed use:-
Continuous Output when Inverter powered is...
35.3Nm - 7.5kW ( 10.05HP) x 2030 RPM at 70 Hz
49.40Nm - 7.5kW ( 10.05HP) x 1450 RPM at 50 Hz
49.40Nm -3.75kW ( 5.03HP) x 725 RPM at 25 Hz
49.40Nm - 0.75kW (1.01HP) x 145 RPM at 5 Hz
49.40Nm - x 15 RPM at 0.5 Hz with suitable Sensorless Vector Inverter Drive
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.