TEC Electric - 2.2kW 3ph 2 Pole High Efficiency Foot Mounting (B3) 90L Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.. IP66 Protection
Fixed mains supply output: 2.2kW (3HP) x 2860RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 286RPM to 4004RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 7.9A at 230V, or 4.5A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 83.2%
175mm Wide x 337mm Long x 229mm high overall in its IP66 enclosure.
Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from the shaft shoulder.
Shaft is 24mm dia x 50mm with 8mm wide key.
Weight is 17.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 2.223TECAB3-IE2-IP66. Previous Part Number was - TECA2-90L1-2-B3-IP66
For Variable Speed use:-
Part Time Output when Inverter powered is...
5.25Nm - 2.2kW ( 2.95HP) x 4004 RPM at 70 Hz
7.35Nm - 2.2kW ( 2.95HP) x 2860 RPM at 50 Hz
7.35Nm -1.1kW ( 1.47HP) x 1430 RPM at 25 Hz
7.35Nm - 0.22kW ( 0.29HP) x 286 RPM at 5 Hz
Continuous Output when Inverter powered is...
5.25Nm - 2.2kW ( 2.95HP) x 4004 RPM at 70 Hz
7.35Nm - 2.2kW ( 2.95HP) x 2860 RPM at 50 Hz
6.24Nm - 0.94kW ( 1.25HP) x 1430 RPM at 25 Hz
3.67Nm - 0.11kW ( 0.15HP) x 286 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.