TEC Electric Motors 160M IE2 Frame 7.5kW 6 Pole AC Induction Motor for 400V or 690V 3 phase supply with Force Ventilation Unit. Suitable for use with a Variable Frequency Drive.
Output: 7.5kW (10HP).
Speed: 970RPM at 50Hz
Voltage 400V 3ph.
Speed Control Range: 97RPM to 1940RPM for 5Hz to 70Hz control.
Full Load Current: 16.1A at 400V.
Power Factor: 0.77.
Efficiency: 87.5% (as a standard motor, excluding the force cooling fan).
Dimensions: 290mm Wide x 760mm Long x 384mm high overall.
Enclosure Rating: IP55 including the cooling fan.
Mounting: Foot mount on 12mm by 15mm holes at 254mm wide x 210mm centres, 108mm back from the shaft shoulder.
Shaft: 42mm dia x 110mm with 12mm wide key.
Weight: 80kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
over-temperature protection: Thermistors included for use with an external protection device.
Part Number: 7.563TECAB3-IE2-FVU (TECA2-160M-6-B3-FVU).
For Variable Speed use:-
Part Time Output:
37Nm, 7.5kW ( 10HP) x 1940RPM at 100Hz.
73.8Nm, 7.5kW ( 10HP) x 970RPM at 50Hz.
73.8Nm, 3.75kW (5HP) x 485RPM at 25Hz.
73.8Nm, 0.75kW (1HP) x 97RPM at 5Hz.
Continuous Output:
52.7Nm, 7.5kW (10HP) x 1358RPM at 75Hz.
73.8Nm, 7.5kW ( 10HP) x 970RPM at 50Hz.
73.8Nm, 3.75kW (5HP) x 485RPM at 25Hz.
73.8Nm, 0.75kW (1HP) x 97RPM at 5Hz.
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.