Tec 225M Frame - 45kW 3ph 4 Pole AC Motor for 400V or 660V 3 phase supply. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz. Includes an axial Force Ventilation Fan
Forced cooling fan requires a separate 230/400V supply.
Fixed mains supply output is 45kW (60HP) x 1475RPM at 400V x 50Hz 3ph.
Full Load Current - 80A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.87 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 400V 'Delta' connection.
Set terminal box links ‘two at one side’ for 660V 'Star' connection.
Cast Iron motor is 435mm Wide x 845mm Long (plus additional 140mm for fv fan) x 560mm high overall in its IP55 enclosure.
Foot mount on 18.5mm holes at 356mm wide x 311mm centres 149mm back from shaft shoulder. Shaft diameter 60mm (see page 32 of attached manual).
Shaft side load is 485kg for 20,000hrs life (6313-Z-C3 bearing)- high side load bearing is available, please ask.
Weight is 315kg.
Construction is in Cast Iron frame to Eff2.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - 45.043TECCB3-IE2 + Force Vent-225
For Variable Speed use…
Continuous Output when Inverter powered is...
291Nm - 45kW (60HP) x 1475RPM at 50Hz
Download the full technical catalogue, data sheets and dimensions from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.