TEC Electric 4kW 3ph 6 Pole IE2 Efficiency Foot Mounting (B3) 132M Frame Force Cooled AC Motor for 400V 3 phase supply. For use with a Variable Frequency Inverter Drive.
Output: 4kW (5.5HP).
Speed: 960RPM at 50Hz.
Voltage 400V 3ph.
Speed Control Range: 96RPM to 1344RPM for 5Hz to 70Hz control.
Full Load Current: 8.86A.
Power Factor: 0.77.
Efficiency: 84.6% (as a standard motor, excluding the force cooling fan).
Dimensions: 252mm Wide x 585mm Long x 318mm high.
Enclosure Rating: IP55.
Mounting: Foot mount on 12mm holes at 216mm wide x 178mm centres 89mm back from the shaft shoulder.
Shaft: 38mm dia x 80mm with 10mm wide key.
Weight: 46kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Over-temperature Protection: Thermistors included for use with an external protection device.
Part Number: 4.063TECAB3-FVU
For Variable Speed use:
Part Time Output:.
19.9Nm, 4kW (5.5HP) x 1920RPM at 100Hz.
39.8Nm, 4kW (5.5HP) x 960RPM at 50Hz.
39.8Nm, 2kW (2.75HP) x 480RPM at 25Hz.
39.8Nm, 0.4kW (0.55HP) x 96RPM at 5Hz.
Continuous Output:
28.4Nm, 4kW (5.5HP) x 1344RPM at 70Hz.
39.8Nm, 4kW (5.5HP) x 960RPM at 50Hz.
39.8Nm, 2kW (2.75HP) x 480RPM at 25Hz.
39.8Nm, 0.4kW (0.55HP) x 96RPM at 5Hz.
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.